Airthings Wave Plus Review

Airthings Wave Plus Review

The Airthings Wave Plus is the ultimate alternative to the conventional, single-use radon testing kits. Unlike the charcoal radon testing kits that take 90 testing days, followed by laboratory analysis for results, the Airthings Wave Plus offers accurate, real-time detection of radon levels in the air inside your home.

What makes Airthings Wave Plus one of the finest radon detectors is that it’s not just a radon detector but also a complete air quality monitor. It features sensors that detect TVOCs (total volatile organic compounds) and carbon dioxide.

In short, with the Airthings Wave Plus, you get a complete breakdown of what the air inside your air contains, and enables you to take the required actions at the right time.

How Does It Work?

The Airthings Wave Plus is an attractive device that you can place anywhere in the room in which you would like to monitor the air quality. This radon detector works on batteries. Once you switch it on, it’ll take the detector about an hour to provide you with the first reading. However, the Airthings Wave Plus radon detector takes about one week to calibrate fully.

After you’ve installed and turned the Airthings Wave Plus on, all you’ve to do is wave your hand in front of the device for it to provide you with instant results. The device can light up in three colors, each representing a distinct indication.

The ring on the detector lights up in green if your air quality is good. The yellow light indicates that the levels of radon in the air are approaching a maximum. If the device lights up in red, it means that the radon levels have already exceeded the maximum limit, and you need to do something about it soon.

If you wish to check the details regarding the exact values of radon, carbon dioxide, and TVOCs in the air, you can do that too. The Airthings Wave Plus can be connected to your smartphone via Bluetooth.

The Airthings Wave Plus features 6 sensors; radon, TVOCs, carbon dioxide, temperature, pressure, and humidity. You can have the exact readings of each of these areas handy on your mobile device!

 Features of Airthings Wave Plus

Airthings Wave Plus comes with a number of noteworthy features that make it what it is – accurate, reliable, and convenient.

Simple Design

The Airthings Wave Plus features a simplistic design. The front side has no buttons, but a ring of light that lights up red, yellow, or green, depending on the air quality. The backside features battery slots for 2 AA size batteries. The simple design makes it possible for a first-time user to operate it.

Simple Monitoring

It’s very easy to monitor the indoor air quality using the Airthings Wave Plus. The light indicators give an instant idea of how good, or bad the air quality is.

The green light indicates a good air quality, yellow lights indicate you need to address the rising radon levels, and red light is an indication of a dangerously high value of radon in the air.

Thanks to the Bluetooth connectivity, you can connect the Airthings Wave Plus to your smart device and access accurate, detailed information.

Six Sensors

One of the most prominent features of the Airthings Wave Plus is the number of sensors it has. It features 6 sensors, which is one of the most unique features that make this radon detector stand out among other available options.

It has sensitive and highly accurate sensors for temperature, humidity, pressure, carbon dioxide, and TVOCs, apart from separate sensors for radon. With the Airthings Wave Plus, you get a complete analysis of the air inside your home.

IFTTT

Airthings Wave Plus comes with the IFTTT channel that enables you to automate your response to the levels of different factors in the air. When any of the factors rises beyond a certain set level, you can immediately take the right actions. For example, if the carbon dioxide level rises above the level you’ve set, you can refresh the air in your room via the automated vents. 

Similarly, you can set your dehumidifier to turn on or off when the humidity levels reach a certain point. With the Airthings Wave Plus, you can have complete control over the indoor air quality!

One Device for the Whole House

Another plus point of the Airthings Wave Plus is that one device can be used for the entire house, unlike the traditional charcoal kits that were single-use only. You can place your Airthings device in any room you wish to monitor the air quality and move it to the next room when you’re done.

Airthings Wave Plus Cons

While most of the Airthings Wave Plus features are incredibly attractive, there are certain areas that may not suit your situation. Let’s have a look at them below:

Calibration Time

Setting up the Airthings Wave Plus is quick and simple, but the final calibration of sensors can take quite a while. Although you can get results as soon as one hour, the accuracy will only be guaranteed once the sensors are calibrated, which can take up to a week.

Not Compatible with Apple HomeKit

Apple HomeKit is the most commonly used smart home platform. Although the Airthings Wave Plus supports the Google Assistant, Alexa, and IFTTT, it doesn’t support Apple HomeKit, which may be a drawback for many users.

Comparing the Airthings Wave Plus to Other Airthings Radon Detectors

Airthings has numerous products to help you detect radon and monitor the air quality inside your home, but what makes the Airthings Wave Plus different than the rest? Let’s have a look.

Airthings Wave Plus vs. Airthings Wave

The Airthings Wave Plus is a level up from the Airthings Wave. Most of the features of the two radon detectors are quite similar, including radon, temperature and humidity sensors, Bluetooth and SmartLink connectivity and hourly readout. However, the Airthings Wave Plus has additional sensors to detect pressure, carbon dioxide, and TVOCs, making it superior to the Airthings Wave.

Airthings Wave Plus vs. Airthings Wave Mini

While the Airthings Wave Plus is a full-fledged solution to your air quality control needs, the Airthings Wave Mini is a great addition to any existing air quality maintenance system.

The Airthings Wave Mini features sensors for TVOCs, temperature, and humidity, whereas, the Airthings Wave Plus has six sensors for TVOCs, temperature, humidity, pressure, carbon dioxide, and radon! The rest of the features, including Bluetooth and SmartLink connectivity, are similar.

Airthings Wave Plus vs. Airthings Home

The Airthings Home is a rather basic radon detector as compared to the Airthings Wave Plus. Featuring a display screen and a radon sensor only makes it suitable for people who only wish to monitor the basics like radon levels in the air.

The Airthings Wave Plus has Bluetooth and SmartLink connectivity with six sensors, all that the Airthings Home lacks.

The Airthings Wave Plus is the ultimate solution to all your indoor air quality monitoring needs. From basic temperature, humidity, and pressure detection to more advanced radon, carbon dioxide, and TVOCs detection, it does it all.

Your home should be a safe and healthy place to live. No matter how neat and clean you keep your home, there’s an aspect that goes unnoticed – the air quality inside your home. If you think it’s only the air outdoors that’s polluted, dirty and unhealthy, you’re sorely mistaken. The air inside your home can be contaminated as well.

The air inside your home can be contaminated with radon, which is a harmful, cancer-causing, radioactive gas. Radon gas is one of the leading causes of lung cancer.

In fact, the EPA states that only smoking is worse than radon, which is why you need to make sure that the air you and your family breathe in every minute of the day is clean and healthy.There are numerous ways by which you can monitor air quality.

You can either have professionals do the job for you, use traditional single-use radon kits, or look for smarter, more convenient options. If you want to keep a real-time check on the air radon levels as well as monitor the air quality inside your home, the Airthings Wave Plus will do this accurately and efficiently.

The smart, battery-powered air quality monitor is surely worth the reputation it has received. If you want to make sure that your house is a healthy place to be and the air that you’re breathing in is clean and safe, the Airthings Wave Plus is a solution to consider.

Click Here to get the Airthings Wave Plus at Sylvane.com

Leave a Comment

Your email address will not be published. Required fields are marked *