You’ve finally decided to buy a safe, but you have no idea where to place it or how to install it properly in a way that you can easily access it.
There are so many ways to install a safe in your house, and most people are looking at how to bolt a safe to the wall.
Bolting a safe to the wall is not really too difficult as long as you have the tools needed to accomplish it.
Hence, we’ll teach you how to bolt a safe to the wall and provide other methods for bolting down a safe securely.
How To Bolt a Safe To the Wall
Bolting your safe to the wall isn’t as challenging as it seems. All you need are tools that might already be on your arsenal and basic handyperson or DIY skills.
With that in mind, here’s one of the simplest and fastest method that even a beginner can follow.
Things You Need
Before we get started with the steps, you need to prepare a few tools for this task.
- A hammer
- Small and large masonry drill bits
- A tape measure
- A pencil
- Knife or scissors
- A corded or cordless drill
- Expansion bolts
Most of the gun and security safes already have pre-drilled holes in the back and base and are designed for installation already.
They also have anchor bolts that you can use for brick or concrete. Still, it is better to have spares just in case you mess up and damage the bolts.
The Step-by-Step Procedure
Now that you’ve prepared everything, let’s proceed to the actual installation of the safe to the wall.
1. Look for a Solid Wall or Surface
Firstly, you need to look for a place where you can install your safe.
Make sure you choose wisely unless you want to put holes around your home because you realize it isn’t the right area after installation.
If it is a gun safe, it should be in a place where you can easily access it when there are criminals and burglars in the house.
Since you will be installing it on a wall, you need to look for a solid surface.
2. Position Your Safe on Your Chosen Location
Once you’ve finally found a location, you need to position your safe in that area.
You must also make sure that nothing would prevent the safe’s door from opening.
3. Remove Hindrances
There are times when a few hindrances would prevent you from properly installing the safe to the wall.
If there is a skirting board on the wall, you can just remove the area where the safe would be installed.
You don’t need to damage the skirting board completely.
If there is carpet on the floor, you should cut out the area where the safe would be installed.
Although it will not be bolted on the floor, the bolt will still be fixed there.
4. Mark the Pre-drilled Holes
We mentioned pre-drilled holes placed on a safe, which is what you will take advantage of.
Using the pre-drilled holes as a guide, get your pencil and start marking the areas of the wall you need to drill.
5. Start Drilling
Once you’ve marked the areas, remove the safe from the wall, and start drilling.
Use the small masonry drill bit first, then switch to the large masonry drill bit.
6. Screw the Anchor Bolts
After drilling the marked areas, put your safe back in and use your screwdriver to screw the bolts in.
Make sure that they are completely secure by trying to move the safe from the wall.
If you do not notice any loose bolts, then the safe is properly installed and ready for use.
How To Secure a Safe Without Bolting It To the Floor
Many people are looking for ways to secure a safe without bolting it to the floor.
The step-by-step guide mentioned above is just one of the many ways to do it.
Most homeowners don’t want to bolt the safe into the floor because of many reasons.
Some don’t want to damage the flooring, especially if they use hardwood or granite tiles.
Whatever reasons you have, here are some other simple ways on how to bolt down a safe without damaging your flooring.
1. Bolt Your Safe To a Concrete or Steel Slab
This is a bit tricky because you cannot simply get any concrete slab to bolt your safe.
It has to be heavy enough to prevent anyone from carrying your safe outside.
If you use a steel or concrete slab, you need to get something wider than your room’s door frame.
It means that you can put the concrete slab inside and bolt the safe after.
The burglars would need to rotate the slab or remove the safe from it if they want to take it.
2. Use Large Wooden Pallets
You can make large wooden pallets inside your room as an alternative if you don’t want to bolt your safe to the floor.
Large wooden pallets are huge and have to be deconstructed if you want to remove them from the room.
You can create your own wooden pallet or hire someone to do it for you.
Ensure that the wooden pallet will be constructed inside your room.
It should also be big enough not to be taken out of the door in your room.
You have to screw the safe from the inside to make it impossible for anyone to relocate it.
They would spend a lot of time deconstructing the pallet!
3. Add Some Weight
Some people also prefer not to bolt the safe to anything.
There is an alternative way to do this, although most professionals do not suggest it.
You can just add more weight to the safe by putting heavy items inside it.
You can use dumbbells, weight plates, or slabs inside to give the vault extra weight.
By doing this, the burglars would need to spend a lot of effort lifting the safe.
The only drawback is that the weight plates and slabs would take up space inside your safe.
This is only applicable if you don’t plan to put a lot of things inside your safe.
4. Use a Security Cable
Another way on how to secure a safe without bolting it to the floor is to purchase a small gun safe with a security cable.
The cable would allow you to strap the safe to any stable object and prevent burglars and other people from taking it.
Although it is only applicable for small safes, it would be a good alternative for bigger safes if you don’t want to bolt them on the floor.
For bigger safes, you need a stronger security cable.
One end of the cable will go through the opening of the safe.
You will tie the other end to any stable construction like your bed frame, a pillar, or a metal pipe.
5. Hide It Under the Floorboard
This is not really the best option since it might damage the floor during the process. It should be your last resort.
You don’t have to drill holes in your floors, but you cannot do this to any kind of floor and floorboards.
You have to make sure that there is space underneath them; else, you won’t have any place to put your safe.
You would need a professional to help you deal with this problem.
Unless you are perfectly certain that you can pull it off without damaging the floors, then you can do it yourself.
6. Bolt It To Another Safe
If you have two safes in your house, the best option is to bolt them together to add extra weight.
Hence, the burglar will have a hard time carrying it outside.
By doing this, you don’t have to stress yourself in finding a place where to install the safe.
When it comes to how to bolt down a safe to another safe, you can screw both safes together.
You can also use a high-strength glue to make sure that it would be tough to separate them from each other.
7. Glue It To the Floor
This process may not look favorable to most people since it is the same as damaging the floors.
Still, this would actually work if you don’t want to bolt the safe to the floor.
It is also a more hassle-free option than bolting.
For this, you would need a high-strength industrial polymer glue.
Add some glue to the edges and at the center of the safe and attach it to the floor.
Let the glue dry, and you are good to go.
Installing Safe Vaults Securely and Properly
Knowing how to bolt your safe properly to the wall and other fixtures can guarantee that all your personal belongings would be safe from burglary.
If you are keeping guns and other dangerous objects, the safe will also prevent your kids or other people from your house from accessing them.
Putting the safe in the right place can help save lives in case of emergencies.